Honda Forza 300 Flaps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aerodynamic decorative appendices for Honda Forza 300 scooters.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 1771
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Hey there! Check out my website to see the latest products I've designed—now available for you!
Don't miss out, hit the link and explore what's new!
My Shop: https://buymeacoffee.com/cc3dprojects/extras
My Website: https://www.cc3dprojects.com/
My YT Channel: https://www.youtube.com/@CC3DProjects
Ciao everyone,
with this model, I have ventured into creating an aerodynamic fin to be applied to the front of my Honda Forza 300 scooter built from 2019 onwards.
Material:
- Material: PETG
Nozzle and Layer Settings:
- Nozzle Diameter: 0.4 mm
- Layer Height: 0.2 mm
Wall, Bottom, and Top Layers:
- Walls: 3
- Bottom Layers: 3
- Top Layers: 3
Infill:
- Infill Density: 15%
- Infill Pattern: Gyroid
Supports:
- Support Type: On build plate only
- Support Density: Snug
Personally, since I can do multicolor prints, I preferred to change the color of the caps and logos.
Feel free to do as you please.
Once the fins were assembled, I applied a coat of protective matte clear paint to them.
I applied double-sided tape to the side opposite the caps and attached them to my scooter.
I hope you like them.
I'm always here if you need help, and in the meantime, happy printing to all of us.
Enrico