Terrarium from IKEA and Nutella glass dooms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple model to convert the ikea or nutella glass doom in a medium - small terrarium.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This model can be printed in PLA, PETG or any other material.
Print the base at 100% infill to prevent water leaks.
Instructions :
Print the base at 100% infill to prevent water leaks. Then, print the mesh 15% file with gyroid, no top layer, no bottom layer. Finally print the filter with no top or bottom layer and 50% rectilinear infill to create the terrain/air separator.
Insert mesh then filter in base and fill up with terrain and you favorites plants (the plants have to like humidity), close up and enjoy!
Parts needed:
- Ikea glass doom 16cm https://www.ikea.com/ch/en/p/skoenja-glass-dome-with-base-clear-glass-black-00497689/
- Nutella jar
