Bambu X1 Nozzle Wiper Brush and PTFE Combo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable item to allow the use of OEM PTFE rollers with a brass brush.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 1127
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After trying a few different combo brush+PTFE wipers I was not satisfied. Most of them put the roller too high or in the wrong place so the nozzle collides when the toolhead is parked. The model this is remixed one was the closest to perfect, so I made some changes for the purpose of accuracy and keeping the OEM wiper at nearly the stock height.
It narrowly avoids being in contact with the nozzle when it is parked, and after a few hundred reliable material changes I think it's completely ready to go.
I think it will work for all X1 and P1 printers.
I printed in standard PLA with thick walls for 100% infill. It probably would be better with any engineering filament.