Tiny Tower: helps you make perfect fits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Tiny Tower helps you print good-fitting parts.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 281
- Wydruki
- 7
- Wyświetlenia
- 1630
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This Tiny Tower helps you print good-fitting parts. No more need to print multiple gauge blocks to find the required clearance. Tiny Tower does it in 2 parts.
A 5.7 degree taper angle works like a magnifying glass. It magnifies the clearance needed by 5 times and shows it as a gap between the base and the top of the tower.
Measure the gap -> divide it by 5 -> that's your clearance for perfect fits.
No gap - means your prints fit well without extra clearance.
This tower was tested on 2 printers and in 3 filaments. You can help me improve Tiny Tower by sharing your results.
P.S. Don't squeeze the tower too much, you won't be able to separate the parts after :)
Print instructions
No supports
You can experiment with different settings/materials/printers