Plissee Klebeplatte / Pleatings adhesive plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My pleatings adhesive plate broke (see picture of the original part) and I would have had to buy 4 new plates with…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
My pleatings adhesive plate broke (see picture of the original part) and I would have had to buy 4 new plates with double sided adhesive tape for around 20€.
But why buy those expensive plates when you can print them yourself? However you still need some good double sided adhesive tape. I used "3M VHB 4910" (transparent) tape, which costs around 10€, but you have 3m of tape (so lot's of plates that you can replace :-)), 19mm wide.
I also designed the plates to be 19mm wide, so you only need to cut the length of the adhesive tape.
Your window frame needs to have a depth of at least 19mm. UPDATE: I have also added a 13.1mm version (original dimensions)
Insert the square nut of the original part in the square hole.
No supports are needed, but I had to add an additional layer as bridge below the screw hole, in order to be printable. You can easily break through it with the screw.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
100%
Post-Printing
In order to increase the stickiness of the adhesive tape, pour a little bit of epoxy resin on the bottom of the plate and let it dry in the sun.
Afterwards apply the tape.
Category: Replacement Parts