1 / 7
Plissee Klebeplatte / Pleatings adhesive plate — image 1
1 / 7

Plissee Klebeplatte / Pleatings adhesive plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My pleatings adhesive plate broke (see picture of the original part) and I would have had to buy 4 new plates with…

Rating
0 / 5
Likes
1
Downloads
32
Makes
0
Views
394
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

My pleatings adhesive plate broke (see picture of the original part) and I would have had to buy 4 new plates with double sided adhesive tape for around 20€.

But why buy those expensive plates when you can print them yourself? However you still need some good double sided adhesive tape. I used "3M VHB 4910" (transparent) tape, which costs around 10€, but you have 3m of tape (so lot's of plates that you can replace :-)), 19mm wide.

I also designed the plates to be 19mm wide, so you only need to cut the length of the adhesive tape.

Your window frame needs to have a depth of at least 19mm. UPDATE: I have also added a 13.1mm version (original dimensions)

Insert the square nut of the original part in the square hole.

No supports are needed, but I had to add an additional layer as bridge below the screw hole, in order to be printable. You can easily break through it with the screw.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

No

Resolution:

0.15

Infill:

100%

Post-Printing

In order to increase the stickiness of the adhesive tape, pour a little bit of epoxy resin on the bottom of the plate and let it dry in the sun.

Afterwards apply the tape.

Category: Replacement Parts

Tags