Cute Crab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute crab ready for printing on MINI+.
- Ocena
- 4 / 5
- Polubienia
- 80
- Pobrania
- 420
- Wydruki
- 2
- Wyświetlenia
- 2234
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
This crab is a personal project that I've made in Blender and shared the .blend under CC0 license. You can download it here.
And now I'm sharing the printable file here as well, I've made only one print from this model and I'm pretty much starting with 3d printing now. So If you try it out and have any suggestions to improve the printing, please let me know.
So far I'm printing with these settings.
- 0.15mm
- PLA
- Supports for enforce only
- Used the Automatic Paiting and also painted enforces on the chest area as well
- 15% infill
- 7h57m at 100%
I don't recommend print it bellow 100% scale, it may get too fragile and hard to get the supports out.