Cute Crab
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.93 – €7.25 net (excluding VAT)
For file: crab-3d-print-02-100_0.4n_0.15mm_PLA_MINI_7h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.59 excluding VAT (range midpoint).
- Weight reported by the author
- 54 g
- Print time reported by the author
- 7.96 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cute crab ready for printing on MINI+.
- Rating
- 4 / 5
- Likes
- 80
- Downloads
- 423
- Makes
- 2
- Views
- 2,237
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
This crab is a personal project that I've made in Blender and shared the .blend under CC0 license. You can download it here.
And now I'm sharing the printable file here as well, I've made only one print from this model and I'm pretty much starting with 3d printing now. So If you try it out and have any suggestions to improve the printing, please let me know.
So far I'm printing with these settings.
- 0.15mm
- PLA
- Supports for enforce only
- Used the Automatic Paiting and also painted enforces on the chest area as well
- 15% infill
- 7h57m at 100%
I don't recommend print it bellow 100% scale, it may get too fragile and hard to get the supports out.