1 / 5
Grip Dock for BeefyGrip (and Pro Trigger Grip) Analogue Pocket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a desktop stand for use with both the BeefyGrip and BeefyGrip Pro for the Analogue Pocket.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 813
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (18)Powiązane
This is a two piece desktop stand for use with both the BeefyGrip and BeefyGrip Pro for the Analogue Pocket.
This STL is released as free for non-commercial purposes. If you would like to purchase a high quality ABS print of this thing you may do so at beefygrip.com (US and International shipping!)
- Designed to be tall enough to accommodate any charging cable while docked.
- It has a cable clip built-in to the rear for a USB-C extension or charging cable. (note: Analogue actually doesn't recommend the use of their dock with a USB-C extension cable, but some folks seem to have found it to work.)
- There is a holster for the BeefyGrip Pro trigger grip hex key. Never lose it around the house.
- It is a two piece assembly. Four (4) M3x16 self tapping screws are required. I also stuck adhesive rubber feet to the bottom of mine.
- Alternate rigid mounting option: there are two 3mm x 110mm spaced through holes on the base if you would like to bolt it down to your shelf or a heavy surface.
- There is a tray in the middle to store spare felt, the new trigger cap add-on for the Pro grip.
- It is a large print, and it is very stable. I also added some slots to drop in pocket change (pennies) to roughly double the weight of the base if one so desires. Pennies not included.
Category: Video Games