1 / 5
Grip Dock for BeefyGrip (and Pro Trigger Grip) Analogue Pocket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a desktop stand for use with both the BeefyGrip and BeefyGrip Pro for the Analogue Pocket.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 86
- Makes
- 2
- Views
- 813
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two piece desktop stand for use with both the BeefyGrip and BeefyGrip Pro for the Analogue Pocket.
This STL is released as free for non-commercial purposes. If you would like to purchase a high quality ABS print of this thing you may do so at beefygrip.com (US and International shipping!)
- Designed to be tall enough to accommodate any charging cable while docked.
- It has a cable clip built-in to the rear for a USB-C extension or charging cable. (note: Analogue actually doesn't recommend the use of their dock with a USB-C extension cable, but some folks seem to have found it to work.)
- There is a holster for the BeefyGrip Pro trigger grip hex key. Never lose it around the house.
- It is a two piece assembly. Four (4) M3x16 self tapping screws are required. I also stuck adhesive rubber feet to the bottom of mine.
- Alternate rigid mounting option: there are two 3mm x 110mm spaced through holes on the base if you would like to bolt it down to your shelf or a heavy surface.
- There is a tray in the middle to store spare felt, the new trigger cap add-on for the Pro grip.
- It is a large print, and it is very stable. I also added some slots to drop in pocket change (pennies) to roughly double the weight of the base if one so desires. Pennies not included.
Category: Video Games