BTT T100V Linear rail plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a plate to attach the BIQU Terminator T100V to any MGN12. It was designed for my Tevo tarantula pro
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This was my first attempt at 3D modeling, I bought the BIQU terminator extruder and while the included mounting brackets are beautifully machined, they are designed for Voron style printers.
This plate should work with most Ender 3 and I3 style printers with a linear rail on the X axis, I designed this plate for my Tevo Tarantula Pro. Pictures 2 and 3 show V1.2 which was a little weak where the belts attached.
For V2.0 belts are attached in the jankiest way possible by looping and adding zip ties.
V2.1 there is a belt slot to attach in a slightly less jank way.
V2.2 adds hexagon extrudes to save plastic but significantly increase print time, because hexagons are the bestagons of course.
****DO NOT PRINT IN PLA***** it will creep like crazy
PETG is better but I printed mine in Sunlu ABS as it was the stiffest filament I had on hand.
No supports are required, 4 walls/perimeters to make the belt grabby bits solid.
You will need to have your extrusion multiplier dialed in so the holes come out to the correct size but if not that is was a 3mm-1/8' drill bit is for.