PinPointer holder for Minelab Vanquish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 1140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around the detector rod.
I glued felt to both inner parts of the sleeve to protect against scratching the rod and for better tightening.
The holder is designed for a Chinese pinpointer purchased from AliExpress, which is pictured.
Let it beep :))
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
Yes
0.2
Infill:
20%
Filament:
Gembird PLA Black
Notes:
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around the detector rod.
I glued felt to both inner parts of the sleeve to protect against scratching the rod and for better tightening.The holder is designed for a Chinese pinpointer purchased from AliExpress, which is pictured.
Let it beep :))
Category: Other