PinPointer holder for Minelab Vanquish
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 158
- Makes
- 0
- Views
- 1,140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around the detector rod.
I glued felt to both inner parts of the sleeve to protect against scratching the rod and for better tightening.
The holder is designed for a Chinese pinpointer purchased from AliExpress, which is pictured.
Let it beep :))
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
Yes
0.2
Infill:
20%
Filament:
Gembird PLA Black
Notes:
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around the detector rod.
I glued felt to both inner parts of the sleeve to protect against scratching the rod and for better tightening.The holder is designed for a Chinese pinpointer purchased from AliExpress, which is pictured.
Let it beep :))
Category: Other