Skadis USB Hub Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap together USB Holder for Ikea Skadis pegboard
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 640
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a generic Amazon 7 port USB holder, and was not able to find an existing model that would allow me to hang the thing on an Ikea Skadis pegboard… so, I whipped this up.
I used the awesome dovetail Skadis hook design (https://www.printables.com/model/271008-skadis-hook-with-dovetail) by @Tggr to let me print the hooks separate from the body of the holder. The body needs to be split down the middle in the slicer when printing. When done, the whole thing gets sandwiched together, with the bow-ties acting much like they wood in a wood slab, pulling the two halves together. and since they are trapped by the body of the hub and the pegboard, there is virtually no chance for them to slip out.
The dovetail hooks press into place with some effort, and lock in place.
You will need to print 4 of the hooks, 3 of the bowties, and one of the body (but split down the middle). When assembled, it will fit the pegboard securely.
Enjoy!