Prusa mk4 outside screen for Lack encousure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter, that allows you to move the mk4's lcd outside the box. Lack "table" has to be modified - driled.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 51
- Wydruki
- 2
- Wyświetlenia
- 881
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Adapter, that allows you to move the mk4's lcd outside the box. Lack "table" has to be modified - driled. Use any material you want, since the part is outside the enclosure.
Parts are made for specific printing orientation! They have arrows - they must point up.
You will need:
- 2x M3 screws, length of min 4, max 40 mm
- 2x wood screws with max width of 4 mm.
How to instal:
1. Print part in specific orientation (arrow pointing up)
- 1x Main_part
- 2x Adapter_2xtimes
2. Drill one 15 mm hole for the LCD cable and LCD ground cable to the Lack table near the door on the Buddy board side (the cables would not reach)
You can cover the hole with some tape leter
3. Atach the Main_part to the Lack table, but make sure the cables from Buddy board can reach to the LCD!
4. Connect the Adapter_2xtimes to the LCD using the oroginal m3 screws
5. Put the LCD screen with the adaprets to the Main_part slots, use 2 m3 screws to secure it in place
6. Connect the cables
- The part Main_part has one hole for ziptie that are compatible with the ones, that come with the mk4 kit
