Door Hinge with Knob and Magnetic Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm doing a French Cleat and want a safe place to put Personal Protect Equipments.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I'm doing a French Cleat and want a safe and clean place to put Personal Protect Equipments.
So I did a Door Hinge for a plexiglass (3mm) door. A Knob and a Knob Holder with a magnet inside.
For Door Hinge, wood side I used 3,5x16mm wood screw, but depends depht of your wall.
For Door Hinge, Plexiglass side I used M3 x 12mm screw with nut.
For Knob, I used 3x12mm wood screw.
For Knub Holder, I used a nail 1,4mm x 10mm to stop it against wood wall and a magnet 10x5x2 mm to hold knob.
When you put Knob on plexiglass be sure that screw will be in exact position of hole of Knob Holder because magnet will be used to stop door with knob screw.
I used PLA for all. I think is ok for this use.