IKEA Lack adjustable foot with clamping feature
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Height adjustable foot for IKEA Lack tables with clamping feature for adjustment thread
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 163
- Wydruki
- 4
- Wyświetlenia
- 1723
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Inspired by the adjustable foot I found on Thingiverse ( https://www.thingiverse.com/thing:3154181 ) I realised my own design that does not need any screws to attach it to the IKEA Lack table foot.
The foot just has to be cut down by at least 2-3cm to open it at the bottom, the adjustable foot assembly then can be inserted from the bottom using slight force to make the foot wall slip into the slot surrounding the housing.
You will additionally need 3 screws M3x12 and 3 square nuts M3 to connect the threaded sleeve to the housing and for the clamping feature to complete the foot assembly. The anti vibration pad is glued to the threaded pillar using double sided adhesive tape.
As anti vibration pad I used this one from amazon :
https://www.amazon.de/gp/product/B08BLXPH6N/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Happy printing !