Bit holder for Specialized Globe Haul electric cargo bicycle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,84 € – 1,02 € netto (bez VAT)
Dla pliku: GlobeBitHolder-ColorChange_0.6n_0.25mm_PLA_MK4_40m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,93 € netto (środek widełek).
- Masa podana przez autora
- 17 g
- Czas druku podany przez autora
- 40,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Holder for six standard 1/4" hex bits that come with the bicycle in the form of their logo
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
The Specialized/Globe Haul ST electric cargo bicycle comes with some hex bits just in a plastic bag. I already lost one :-( so I figured I'd make a bit holder. This would probably work better in TPU mechanically, but I had some PLA on hand that more-or-less matched the logo colors, so I figured I'd try PLA first. PrusaSlicer 2.6 figured out the color breaks no trouble. In the photos are Prusa Galaxy Black on the bottom, Hatchbox Gold in the middle, and Proto-Pasta Heart-throb Red Metallic (HTPLA) for the tongue.
Fit is rather tight… might be good to sand/file a bit unless you want to have to get the bits out with pliers the first few times. (If you want to change that, FreeCAD file enclosed… change the vertical constraint in the one sketch hiding inside Pocket001 of the Body.)
I used Gimp and Inkscape to convert the logo for use in FreeCAD and the resulting .stl was badly in need of fixing through netfabb, so I included that repaired .stl.
Because I based this work on Specialized/Globe's presumably copyrighted/trademarked logo, I am not claiming any rights to this model. If you were to use it commercially, you probably ought to ask them first.
I was going to make a plain boring rectangular prism with some hexagonal holes, but then I saw Michael Borque's “Hex bit holder bit teeth” over at https://www.thingiverse.com/thing:6214234/ and was inspired to get a little bit more creative.
Note that this is just a holder and not a handle despite the tips being accessible. If you try to use it as a handle, you'll surely split the layers.
There's no particular reason you'd need to print this with a 0.6mm nozzle. Standard 0.4 should work fine (but slower)… I just had the 0.6 still in the printer from a different project.