1 / 2
Bit holder for Specialized Globe Haul electric cargo bicycle — image 1
1 / 2

Bit holder for Specialized Globe Haul electric cargo bicycle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.84 – €1.02 net (excluding VAT)

For file: GlobeBitHolder-ColorChange_0.6n_0.25mm_PLA_MK4_40m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.93 excluding VAT (range midpoint).

Weight reported by the author
17 g
Print time reported by the author
40.2 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Holder for six standard 1/4" hex bits that come with the bicycle in the form of their logo

Rating
0 / 5
Likes
4
Downloads
14
Makes
0
Views
170
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

The Specialized/Globe Haul ST electric cargo bicycle comes with some hex bits just in a plastic bag. I already lost one :-( so I figured I'd make a bit holder. This would probably work better in TPU mechanically, but I had some PLA on hand that more-or-less matched the logo colors, so I figured I'd try PLA first. PrusaSlicer 2.6 figured out the color breaks no trouble. In the photos are Prusa Galaxy Black on the bottom, Hatchbox Gold in the middle, and Proto-Pasta Heart-throb Red Metallic (HTPLA) for the tongue.

Fit is rather tight… might be good to sand/file a bit unless you want to have to get the bits out with pliers the first few times. (If you want to change that, FreeCAD file enclosed… change the vertical constraint in the one sketch hiding inside Pocket001 of the Body.)

I used Gimp and Inkscape to convert the logo for use in FreeCAD and the resulting .stl was badly in need of fixing through netfabb, so I included that repaired .stl.

Because I based this work on Specialized/Globe's presumably copyrighted/trademarked logo, I am not claiming any rights to this model. If you were to use it commercially, you probably ought to ask them first.

I was going to make a plain boring rectangular prism with some hexagonal holes, but then I saw Michael Borque's “Hex bit holder bit teeth” over at https://www.thingiverse.com/thing:6214234/ and was inspired to get a little bit more creative.

Note that this is just a holder and not a handle despite the tips being accessible. If you try to use it as a handle, you'll surely split the layers.

There's no particular reason you'd need to print this with a 0.6mm nozzle. Standard 0.4 should work fine (but slower)… I just had the 0.6 still in the printer from a different project.