Wyze Angled Window Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple angled window mounts for the Wyze Cam V3. 10 Degrees, 20 Degrees and 20x5 Degrees
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 666
- Wydruki
- 9
- Wyświetlenia
- 2277
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a Wyze cam facing my entry but it wasn't lined up correctly when against the glass. If I angled it away I got bad glare during the day and reflections at night. I made these mounts and they have worked well for me, 10 and 20 degree options. The design is omni-directional so you can mount the cam any way and you'll get a different angle (up, down, left, right). I left enough space on the front to be able to use clear mounting tape, or if they are on a ledge its not too big to prevent the cam from standing on its own. Any greater than 20 degrees and you end up with a very big mount since the wide lens requires a very wide cone at larger angles.
I print them the way the STL is oriented, no supports needed. It is purposefully thin, so you can print 2 walls and 2 top/bottom with VERY little need for infill (I might design that out in a revision). Let me know if you have questions or want other variants.
10/12/23 - Added a 20 Degree by 5 Degree angle as requested by a user.