Wyze Angled Window Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multiple angled window mounts for the Wyze Cam V3. 10 Degrees, 20 Degrees and 20x5 Degrees
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 666
- Makes
- 9
- Views
- 2,277
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
I had a Wyze cam facing my entry but it wasn't lined up correctly when against the glass. If I angled it away I got bad glare during the day and reflections at night. I made these mounts and they have worked well for me, 10 and 20 degree options. The design is omni-directional so you can mount the cam any way and you'll get a different angle (up, down, left, right). I left enough space on the front to be able to use clear mounting tape, or if they are on a ledge its not too big to prevent the cam from standing on its own. Any greater than 20 degrees and you end up with a very big mount since the wide lens requires a very wide cone at larger angles.
I print them the way the STL is oriented, no supports needed. It is purposefully thin, so you can print 2 walls and 2 top/bottom with VERY little need for infill (I might design that out in a revision). Let me know if you have questions or want other variants.
10/12/23 - Added a 20 Degree by 5 Degree angle as requested by a user.