1 / 12
Hot air gun clip on stand with a magnet — zdjęcie 1
1 / 12

Hot air gun clip on stand with a magnet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand for SMD rework station hot air gun with a magnet.

Ocena
5 / 5
Polubienia
26
Pobrania
103
Wydruki
1
Wyświetlenia
420
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Made this because the holder that came with the gun is wall mounted and I didn't want to take it off the wall when I needed to do some remote work.

Clips around the handle and you can slide it back and forth to activate and deactivate the gun. Points the gun upwards when set on the table.

Magnet hole is for 20 mm diameter 4 mm thick magnet but you can remix to suit whatever magnet you have. Just test first that it is strong enough to work.

STEP file included.

Tagi