LR41 to LR44 Battery Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery adapter to use LR41 in place of LR44. LR41 is also known as AG3 384 392 192 LR736 L736 GP192 and V36A button…
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 256
- Wydruki
- 4
- Wyświetlenia
- 1051
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Battery adapter to use LR41 in place of LR44.
LR41 is also known as AG3 384 392 192 LR736 L736 GP192 and V36A button battery.
LR44 is also known as AG13 357 L1154 A76 PX76A 303 D303 and D357 button battery.
Battery in my VINCA DCLA-0805 Digital Calipers was dying and I didn't have any spare replacements. Had a bunch of LR41 on hand from kids LED toys and had to improvise.
Printed in PLA with 0.1mm layer height and about 20% infill. 1mm hole may need some cleaning after printing. When slicing flip the model so the opening is facing up and bigger round area is on the print bed.
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
No
Supports:
No
0.1mm
Infill:
20%
Filament:
AIO Robotics PLA AIOORANGE
Notes:
Infill doesn't really matter but I printed it at 20%, there is a very little infill needed.
1mm hole may need to be cleaned with a small drill bit or a needle.
When slicing flip the model so the opening is facing up and bigger round area is on the print bed.
Category: DIY