1 / 4
Sodastream bottle adapter V2 (DUO) for standard 0,5 liter pet-bottles — zdjęcie 1
1 / 4

Sodastream bottle adapter V2 (DUO) for standard 0,5 liter pet-bottles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

2,57 € – 3,14 € netto (bez VAT)

Dla pliku: sodastream_quick_adapter_duo_0.4n_0.15mm_PETG_MK3S_3h24m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 2,85 € netto (środek widełek).

Masa podana przez autora
26 g
Czas druku podany przez autora
3,4 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Adapter enables the use of standard 0,5 liter PET-Bottles (Coke, Fanta,..) with Sodastream DUO machines

Ocena
5 / 5
Polubienia
42
Pobrania
324
Wydruki
2
Wyświetlenia
3063
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Make your sodawater with a 0,5 liter pet bottle, like coke, fanta,…

Works on Sodastream DUO, EASY, TERRA, ART, POWER and JET which uses normally 1 Liter Sodastream PET-Bottles

Older Systems like COOL,.. have shorter bottles, for that you have to use the V1 adapter (original model)

For sealing you can eather use a o-ring gasket D22x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole

Supports are only needed for the outer ring, i used a supportblocker cylinder in the slicer program to avoid supports on the rest of the adapter.

You can use a normal Coke / Fanta / … or other 0,5 liter bottles with this adapter.

I used as material for the adapter PETG, but also PLA is possible.

The quick connect is sealing on the inside, sandpaper the inner side of the adapter for better sealing surface quality if needed.

Tagi