Bathroom Faucet Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knob caps for a bathroom faucet
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 390
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
I would print with at least 3 walls so the legs are strong enough to not snap off super easy. They are kind of finicky still and I had to print a couple of times to get one that the legs didn't break off while removing the support material.
If you have multiple color/material capabilities, I would recommend using PLA for the part and PETG as the Surface Interface Material between the supports and part as the materials don't like to stick together that well and come easily apart. If you want to use PETG for the part for translucency, then you can use PLA for the Support Interface Material.
I printed these with my Bambu Lab P1P with an AMS. Bambu Lab Black and White PLA, and SUNLU Translucent PETG for support interface material.