1 / 2
1/2" pex to 1/2" NPT male adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For use adapting 1/2" pex tube to a 1/2" shut off valve under my kitchen sink.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 459
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
If you need to go from ½" pex tube to a ½" npt valve or other water pipe this is for you. I remixed it bc I couldn't find anything like it when I searched. Seems to work I still need to pressure test it once I have the water supply hooked up. I left a little space instead of pushing the pex up against the larger portion of the fitting that way it could expand when I clamped it without stressing the fitting. Make sure to use plumbing tape on the threads.