Gilbert Engineering Fuzion Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EMT Mount for the Gilbert Engineering Fuzion. The center design of this prop offers many challenges in creating mounts…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
EMT Mount for the Gilbert Engineering Fuzion.
The center design of this prop offers many challenges in creating mounts and because of this I've avoided a complex and skinny center mount.
These mounts create an H design using EMT. You have a mount on the top and bottom of each side and two off center mounts to hold the crossbar.
Print:
2 fuzion-bl-ur (bottom left & upper right)
2 fuzion-ul-br (upper left & bottom right)
2 fuzion center
To attach the center support to the outer supports, use a 1/2" PVC T with the EMT bushings you can print in my other designs. I use self tapping screws to drill through the PVC to remove any movement.
I use 4 perimeter walls and 4 top/bottom layers. 20-30% infill is plenty.
Category: Other