Gilbert Engineering Fuzion Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EMT Mount for the Gilbert Engineering Fuzion. The center design of this prop offers many challenges in creating mounts…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
EMT Mount for the Gilbert Engineering Fuzion.
The center design of this prop offers many challenges in creating mounts and because of this I've avoided a complex and skinny center mount.
These mounts create an H design using EMT. You have a mount on the top and bottom of each side and two off center mounts to hold the crossbar.
Print:
2 fuzion-bl-ur (bottom left & upper right)
2 fuzion-ul-br (upper left & bottom right)
2 fuzion center
To attach the center support to the outer supports, use a 1/2" PVC T with the EMT bushings you can print in my other designs. I use self tapping screws to drill through the PVC to remove any movement.
I use 4 perimeter walls and 4 top/bottom layers. 20-30% infill is plenty.
Category: Other