DCAPS for Arturia Keystep and Behringer Model-D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DCAPS are designed for the Behringer Model-D case and can be used either as table top (perfect with Arturia Keystep)…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 1601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
DCAPS are designed for the Behringer Model-D case and can be used either as table top (perfect with Arturia Keystep) or as an extension of an Eurorack Modular System.
To mount the DCAPS on the original Behringer Model-D case, remove the 4 screws on each side of the case and remove the metal and wooden panels. Re-use the 4 screws to screw the DCAPS onto the metal case. At the front of the DCAPS there are holes which can be used to screwed the assembly of DCAPS and Model-D case on top of an existing Eurorack.
Within the DCAPS, modules with a maximum depth of 65mm can be build in. A circular opening at the inner side of each DCAP enables the routing of cables from inside to external hardware.
The two smaller holes at the outside of each DCAP are intended to be used with special designed brackets to fix the DCAPS on the DCASE available on:
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
10-20
Filament: colorFabb PLA black
Notes:
Best to be printed with PLA in upright position with support.
The two DCAPS fit perfectly on the print table of a Prusa i3 printer.
Category: Music