1 / 3
Hummingbird Feeder Replacement Parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement parts for your sun-damaged hummingbird feeder.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 474
- Wydruki
- 1
- Wyświetlenia
- 1868
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (2)Kolekcje (78)Powiązane
My hummingbird feeders were getting quite sun damaged, so I designed some replacement parts to fit the original glass bottle. The glass bottle is from the Perky-Pet 16oz hummingbird feeder, model 204CP-4, though I've included the F3D file for editing if you have a slightly different one.
I did redesign the bottom so that the flowers and spouts are much easier to print. They also have notches so they all align properly.
Printing details:
- 0.25mm layers using a 0.6mm nozzle ("structural" setting on the Prusa MK4), though it'll work just fine with other layer heights.
- 100% infill (there's very little) for waterproofing.
- 3 perimeters.
- Recommend printing in PETG or any sun-resistant filament (I used Overture's red and green PETG).
- Supports are only needed on the underside of the “Top” piece to support its roof.
- You need 5 of the flowers, print them with the top (the visible surface) on the build plate.