1 / 3
Hummingbird Feeder Replacement Parts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement parts for your sun-damaged hummingbird feeder.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 474
- Makes
- 1
- Views
- 1,868
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
My hummingbird feeders were getting quite sun damaged, so I designed some replacement parts to fit the original glass bottle. The glass bottle is from the Perky-Pet 16oz hummingbird feeder, model 204CP-4, though I've included the F3D file for editing if you have a slightly different one.
I did redesign the bottom so that the flowers and spouts are much easier to print. They also have notches so they all align properly.
Printing details:
- 0.25mm layers using a 0.6mm nozzle ("structural" setting on the Prusa MK4), though it'll work just fine with other layer heights.
- 100% infill (there's very little) for waterproofing.
- 3 perimeters.
- Recommend printing in PETG or any sun-resistant filament (I used Overture's red and green PETG).
- Supports are only needed on the underside of the “Top” piece to support its roof.
- You need 5 of the flowers, print them with the top (the visible surface) on the build plate.