eSun spool adapter and gap filler for Bambu spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter can be used to use Refill Filament from eSun on the printed or the original spools from Bambu Lab
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 1518
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter ring used for 2 things:
- Being able to insert eSun refills which have a wider cardboard center than Bambu spools
- To fill the gap on the Bambu Lab spool when refill eSun which is narrower than the Bambu spool
If we don't fill the space, with AMS the filament ends up getting stuck and breaking.
This spool space filler ring should be placed on the Bambu spool side of the notch, you will see, there is the reservation for the notch.
Print in Petg, ASA or ABS, to ensure heat resistance when drying your filament and use your preferred settings.
PLA works too :)
FRANCAIS
Il s'agit d'une bague d'adaptation utilisée pour 2 choses :
- Pouvoir insérer les recharges eSun qui ont un centre en carton plus large que celui des bobines Bambu
- Pour combler l'espace sur la bobine Bambu Lab lors recharge d'eSun qui est plus étroite que les bobines Bambu
Si on ne comble pas l’espace, avec l’AMS le filament finit par se coincer et casser.
Cet anneau de remplissage d'espace de bobine doit être placé sur le côté de la bobine Bambu de l’encoche, vous verrez, il y a la réservation pour l’encoche.
Imprimez en Petg, ASA ou ABS , pour garantir la résistance à la chaleur lors du séchage de votre filament et utilisez vos paramètres préférés.
Le PLA fonctionne aussi :)