1 / 2
Universal webcam cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very simple webcam cover, should work with most regular models.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this two-part webcam cover to be mounted on top of the camera using double sided tape. I tried to keep it as generic as possible, so it works with different cameras as well.
The two parts were printed separately and then assembled by hand. I did not yet do a print-in-place test, so I'm not sure if that would work, but let me know if you try that!
It printed in 21 minutes on my Ender 3 S1 with a 0.4mm nozzle.
The .f3d file is also available in he downloads in case you want to edit this model in Fusion 360.