Prusa Printer Lack Enclosure 75cm (supports MMU2S/ spool holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This enclosure is based upon the Prusa Printer Enclosure V2 – with MMU2S support.
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 466
- Wydruki
- 3
- Wyświetlenia
- 7679
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This enclosure is based upon the Prusa Printer Enclosure V2 – with MMU2S support.
https://www.prusaprinters.org/prints/3673-prusa-printer-enclosure-v2-with-mmu2s-support
I wanted to have a tall enclosure to be able to keep the spool holder on the printer and mount the MMU in the future, so i began to look into stacking multiple IKEA LACK table legs.
After i found out that the legs are hollow, apart from some wood blocks at the top and the bottom, I decided to re-design the plastic printable parts so the legs would slide in place on top of them.
The free height in this enclosure is 75cm.
This is the maximum height possible with these printed parts. I took off the ends of the lack table legs using a table saw (there is a 5cm block on one side of the leg, 2cm on the other.) which means each leg is left hollow and 33cm long.
Print instructions
All models are sliced with default Prusament PETG profile, 10% infill, with custom support enforcers.