Drawer latch for Ikea (Metod) kitchen internal drawer v2 (untested)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Second version of a drawer latch that makes sure the internal drawer is pulled out with the exterior front.You may…
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 163
- Wydruki
- 2
- Wyświetlenia
- 1472
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Second version of a drawer latch that makes sure the internal drawer is pulled out with the exterior front.You may need to modify this based on your specific kitchen. The FreeCAD designs are included.
The first version did not really work that well..
Note that I haven properly tested this design. I moved out of that housen before I was done.
The design files are included. I've created this in FreeCAD and most of the dimension can be changed in the Parameters spreadsheet.
I suggest to print the lever and latch on a higher infill percentage.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
No
Supports:
Yes
0.20
Infill:
25%
Filament:
Whatever PLA PLA Yes
Category: Kitchen & Dining