Desiccant Spool Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spooled shaped box can hold many desiccant packs in a dryer for reconditioning or storage.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 1113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This desiccant container can hold many desiccant packs and is shaped like a filament spool for an easy fit in a filament dryer. The desiccant packs can be reconditioned in the dryer. Perfect if you have a dual spool filament dryer.
There are two versions of this design. One has vent holes modeled in Fusion 360 and printed as is. The other has solid or blank sides. This will let you use any pattern you want when slicing. See the attached video for details.
I would recommend printing with ASA (or similar) due to the heat it will be exposed to in a dryer.
- Filament: ASA (or equivalent due to heat)
- Standard speed and settings (from Bambu Lab Studio)
- Adjust cooling fan for 10 to 20% max to keep ASA from warping.
- No support needed
See the attached video if you want to use a hex pattern or or other pattern used in support.