1 / 5
TPU Bottle Bumper for kid's Klean Kanteen — zdjęcie 1
1 / 5

TPU Bottle Bumper for kid's Klean Kanteen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Friction fitted protective gear for your bottle

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

!

This set of rings are friction fitted around the bottle to dampen shocks, limit noise and protect the floors and the bottle.

Some force is needed to insert it, not too much… for an adult :P

I've included the Fusion360 source file, most of the important features are parametric.

If you print it, post the make of it ! (:

 

Print settings

I used a Sunlu TPU filament (rated at 95A), using a 0.4 nozzle (I did try a 0.6, but it oozed a lot) at 0.2 SPEED profile on Prusa Slicer 2.6.1.

No supports needed, you can print both parts at the same time, stringing was minimal for me.

I used the following filament settings:

Tagi