1 / 3
Ecoflow wave 2 large hose to 6" pipe sleeve part — zdjęcie 1
1 / 3

Ecoflow wave 2 large hose to 6" pipe sleeve part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hose connector from large ecoflow wave 2 hose (with another connector) to 6" pipe

Ocena
0 / 5
Polubienia
6
Pobrania
79
Wydruki
0
Wyświetlenia
984
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

For those trying a more permanent install of the Ecoflow Wave 2.  While I haven't designed the part clicking into the large Ecoflow hose I found and printed TesTeeCul's EcoFlow Wave 2 Hose Takeoff Large: https://www.printables.com/model/535894-ecoflow-wave-2-hose-takeoff-large and then designed a sleeve that slips over it and on the other end slips over a 6" drain pipe I found at Home Depot: VPC 6 in. X 24 in. ABS SDR-35 Riser Pipe 6006-2 - The Home Depot  It says OD is 6.25". 

Put that through the wall and now I have something I can work with. See also the version that works for the small hose (https://www.printables.com/model/594320-ecoflow-wave-2-small-hose-to-6-pipe-sleeve-part )
Next I would like to just integrate the locking part to this adapter so I would have one less piece/cleaner setup. …work in progress

Tagi