Ecoflow wave 2 large hose to 6" pipe sleeve part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hose connector from large ecoflow wave 2 hose (with another connector) to 6" pipe
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 79
- Makes
- 0
- Views
- 984
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
For those trying a more permanent install of the Ecoflow Wave 2. While I haven't designed the part clicking into the large Ecoflow hose I found and printed TesTeeCul's EcoFlow Wave 2 Hose Takeoff Large: https://www.printables.com/model/535894-ecoflow-wave-2-hose-takeoff-large and then designed a sleeve that slips over it and on the other end slips over a 6" drain pipe I found at Home Depot: VPC 6 in. X 24 in. ABS SDR-35 Riser Pipe 6006-2 - The Home Depot It says OD is 6.25".
Put that through the wall and now I have something I can work with. See also the version that works for the small hose (https://www.printables.com/model/594320-ecoflow-wave-2-small-hose-to-6-pipe-sleeve-part )
Next I would like to just integrate the locking part to this adapter so I would have one less piece/cleaner setup. …work in progress