1 / 1
Pole Mount to suit SS4H-ZRG Zigbee Rain Gauge — zdjęcie 1

Pole Mount to suit SS4H-ZRG Zigbee Rain Gauge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parametric pole mount to enable the Smart Solution 4 Home Zigbee Rain Gauge SS4H-ZRG to be mounted on a TV antenna pole.

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
0
Wyświetlenia
281
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Introduction

The algos suggested this awesome video by Smart Solution 4 Home. I tossed the creator $5 (optional), got the files, and printed them. Props to the creator, it's a brilliant design. However, I wanted to mount the rain gauge on my roof, where I had a nice vertical TV antenna pole but no immediately accessible horizontal surfaces.

Solution

  • Measured from the original design of SS4H-ZRG as-printed, this is an entirely new thing
  • Designed for easy printing (print it as downloaded, no need to re-orient)
  • Zip tie ducting for easy routing of zip ties in-situ

Vitamins

(The other things you will need.)

  • 25mm vertical TV antenna pole
  • Zip ties up to 1.4mm thick and 4mm wide
  • Screws up to 15mm long and 3.5mm wide

Printing

  • 4 vertical walls
  • 5 top/bottom shells
  • 15mm rectilinear infill
  • This printed in about 2hrs on my Voron 2.4 using ABS

Remixing

  • Fusion 360 file provided for easy remixing
  • Please note license is copyleft
  • Fusion 360 file is fully parametric, so you can easily adjust for different
    • Screws
    • Pole
    • Zip ties