1 / 1
Pole Mount to suit SS4H-ZRG Zigbee Rain Gauge — image 1

Pole Mount to suit SS4H-ZRG Zigbee Rain Gauge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric pole mount to enable the Smart Solution 4 Home Zigbee Rain Gauge SS4H-ZRG to be mounted on a TV antenna pole.

Rating
0 / 5
Likes
3
Downloads
35
Makes
0
Views
281
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

Introduction

The algos suggested this awesome video by Smart Solution 4 Home. I tossed the creator $5 (optional), got the files, and printed them. Props to the creator, it's a brilliant design. However, I wanted to mount the rain gauge on my roof, where I had a nice vertical TV antenna pole but no immediately accessible horizontal surfaces.

Solution

  • Measured from the original design of SS4H-ZRG as-printed, this is an entirely new thing
  • Designed for easy printing (print it as downloaded, no need to re-orient)
  • Zip tie ducting for easy routing of zip ties in-situ

Vitamins

(The other things you will need.)

  • 25mm vertical TV antenna pole
  • Zip ties up to 1.4mm thick and 4mm wide
  • Screws up to 15mm long and 3.5mm wide

Printing

  • 4 vertical walls
  • 5 top/bottom shells
  • 15mm rectilinear infill
  • This printed in about 2hrs on my Voron 2.4 using ABS

Remixing

  • Fusion 360 file provided for easy remixing
  • Please note license is copyleft
  • Fusion 360 file is fully parametric, so you can easily adjust for different
    • Screws
    • Pole
    • Zip ties