Rough 'n' Ready Broadlink RM Pro Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a Broadlink holder. I knocked it up, very quickly, and have used it for 5 years!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on a Broadlink holder. I knocked it up, very quickly, this morning, after my previous holder (by MNGNZ - thing: 2243225) broke. It was the third copy of his design that I'd printed, and they all broke in the same place. So I realised that, as much as I loved the minimalist design, it wasn't working for me.
Whether that's a fault with my printer, or (more likely) the nut that operates it, is debateable. But as there was only one other design on Thingiverse - which wasn't suitable for my needs - I decided to whip up my own. I liked the single screw fixing of MNGNZ's design, so I started with that. Everything thereafter was designed from the ground up, without reference to the old one.
After I printed it, I realised the vertical "tongue" was a little longer than I'd envisaged, and was visible behind the RM Pro. So I have reduced the length in the STL, even though I shan't be printing another unless the current one breaks.
I printed it flat on the build surface, and used supports. This creates a very small (maybe two layers) support underneath - which you don't actually have to remove in practice.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: E-DA PLA Black
Notes:
No need to remove the supports under the base
Category: Hobby