1 / 2
Retro Arms CNC Hopup Chamber - Improved tensioner nub and C-clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tensioner nub that does not wobble and a C-clip with a tooth for the inner barrel.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 279
- Wydruki
- 0
- Wyświetlenia
- 990
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (27)Powiązane
Some issues of Retro Arms CNC hopup chamber come with a tensioner nub that is 0.5mm narrower than it should be, so it wobbles left-right a lot, making the hopup inconsistent. I made this model tighter so it remains in dead center.
Also, my C-clip came without the tooth that keeps the inner barrel aligned at the right angle, so I had to make one myself.
- Print in ASA or PETG
- Preferably print with 0.25mm nozzle, even though the 0.40mm nozzle might work fine on a well tuned printer. SLA printers also.
- When printing on FDM printer, print at least two objects at a time, so the layers can cool down properly
- 100% infill
- Supports on buildplate
After printing check if the nub can slide freely in the unit. If not, use X-ACTO knife to adjust the printed model to fit.