1 / 2
Retro Arms CNC Hopup Chamber - Improved tensioner nub and C-clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tensioner nub that does not wobble and a C-clip with a tooth for the inner barrel.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 280
- Makes
- 0
- Views
- 993
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Some issues of Retro Arms CNC hopup chamber come with a tensioner nub that is 0.5mm narrower than it should be, so it wobbles left-right a lot, making the hopup inconsistent. I made this model tighter so it remains in dead center.
Also, my C-clip came without the tooth that keeps the inner barrel aligned at the right angle, so I had to make one myself.
- Print in ASA or PETG
- Preferably print with 0.25mm nozzle, even though the 0.40mm nozzle might work fine on a well tuned printer. SLA printers also.
- When printing on FDM printer, print at least two objects at a time, so the layers can cool down properly
- 100% infill
- Supports on buildplate
After printing check if the nub can slide freely in the unit. If not, use X-ACTO knife to adjust the printed model to fit.