1 / 5
The Jagged Pill Desiccant Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a desiccant container that looks like a big pill.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a desiccant holder that looks like a big pill. It is made to fit inside a filament spool, but I am sure it will fit in other places.
It is modeled in two pieces and threaded. You can load the pill by separating the two pieces or by stuffing it through the sides.
The male threaded side will need some support.
If you use it in a dryer, be sure use ASA or equivalent due to the high temperature exposure.
- Filament: Recommend ASA or equivalent
- standard settings on Bambu Lab Studio for ASA
- Set cooling fan to 20% or less (to prevent warping)
For more information you can watch the attached video: