Desiccant Box for the Bambu Lab AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This desiccant box fits in the front cavities of the Bambu Lab AMS
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 832
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This desiccant box is a drop in fit for the front cavities in the Bambu Lab AMS. In the past I had always just dropped the desiccant packs in the cavities and that worked great. It was somewhat unsightly, but it worked.
This desiccant box lets you drop the filament in and stay somewhat hidden. The tab on top lets you grab and remove the box easily.
The temperature in the AMS can be warm but not hot. While I printed it using ASA, I am sure you can use your preference of filament (PLA, PETG, etc…).
- Filament - Any filament
- Color - Black (to remain hidden)
- No support (print upright)
For more information you can watch the attached video: