1 / 5
Lead Screw Cleaner - Handle Remix - Bambu
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lead Screw Cleaner with Handle Remix - suitable for Bambu P1P, P1S, X1, X1C Printers
- Ocena
- 4,667 / 5
- Polubienia
- 40
- Pobrania
- 213
- Wydruki
- 3
- Wyświetlenia
- 1973
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 10)Remiksy (0)Kolekcje (78)Powiązane
A lead screw cleaner with handles - suitable for standard 3d printer lead screws, but most useful for Bambu printers where it can be hard to actually get the cleaner on and off the back lead screw.
This is a remix of a very nice design by Jal Shah which can be found here
Usage
- cut some kitchen sponge and push in to base on both sides
- add some isopropyl alcohol to sponge
- attach each side to the lead screw
- move axis up and down
When assembling you might need to put a drop of super glue in to the four magnet sockets on the base.
Fixings required
- six 6x3mm magnets
- four M3 brass inserts (easily found on amazon or aliexpress)
- four M3x10 socket head screws (easily found on amazon or aliexpress)
- kitchen sponge
Print settings
- PLA
- 0.4mm nozzle
- 3 layer wall
- no support
- 20% infill
- gyroid infill pattern
- no brim
- no supports
- no ironing
- adaptive layer height (using the default adaptive layer bambu studio settings)
Insert type
Screw type
Print Orientation
