Inner-Sleeve for Hazard 4 Launch-Pad Molle + Ayotu Case + ReMarkable 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I own a ReMarkable with an Ayotu Case that I normally put in a Hazard 4 sleeve. I wanted a little more protection
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is probably a very very specific thing I've made here, but what the hell, might as well share it.
I own a ReMarkable 2 with an Ayotu Case https://www.amazon.com/gp/product/B094NBGG78/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
that I normally put in a Hazard 4 sleeve
I wanted a little more protection because I mountain bike to class. So I created a sleeve that would fit the ReMarkable while attached to the Ayotu Case, placed inside a Hazard 4
Dimensions are 9.85"L X 7.85"W X 0.446" Depth The inner space is 0.44, so this sleeve could potentially fit other tablets as well, although this one was made for the Ayotu Case on a Remarkable 2, made to fit inside a Hazard 4 molle case.
Print it standing up and diagonally on your print bed, although I have a K1Max so I just printed it along the x axis. I used purple glue and no supports (obviously).