Liczymy pasujące modele…
Hi, So recently, the tip support of my reMarkable pen started breaking away. Since the pen is expensive, I created a small part to replace the old broken tip support. I used a 0.25 mm nozzle and 0.1 mm layer height; a 0.4 nozzle could…
This 3D model is a support piece for the ReMarkable Marker and Marker Plus, designed to fix worn, cracked, or broken nib supports. It secures the nib in place, extending the life of your pen. Features: Perfect Fit: Designed to fit…
Unofficial stand for the reMarkable 2.0 e-ink tablet. Intented for use with book folio, but it will also hold the tablet without cover. For use without a folio, there is an alternate .stl available. The stand can be secured to a surface…
This dock is clearance for the cloth book folio. The leather may fit I have no idea. Naked Remarkable will be loosey goosey. Print with a brim to discourage warping. connector use is on Amazon, other connectors won't work.…
A cap for the reMarkable Marker/Marker Plus. It has a flat side to allow the marker to continue to sit flush and flat against the tablet magnetically. The cap can help prevent your pen nib collar from breaking, which is costly to replace.…
Staedtler's Noris Digital Jumbo Stylus has a fabulous feel, better than the EMR stylus from reMarkable , and a fraction of the price, but lacking that magnetic attachment. This model slips onto the stylus and holds a number of magnets…
Remarkable Paper Pro Stand, 20° or 60° angle based on how you stand it. Printed in multiple parts to fit on standard printer. To assemble you need 8 - M3 heat set inserts 8 M3 bolts (anywhere from 8-12mm in length) Optionally there are…
These are sleeves that will fit over a Remarkable pen / marker (fit to the Marker Plus), which supports the replaceable stylus tip. The plastic structure on these markers that normally supports the tip is very thin and brittle. Dropping…
For the reMarkable 2 with book folio I designed a protection for the pen. So it can't happen anymore that the pen gets loose. The back of the clip is flattened so that the tablet can be placed straight. As material I have taken PLA. With…
Stylus Holder for a reMarkable 2. Works with the official reMarkable leather cover. I just used some double-sided tape to hold it against the back cover. The reMarkable itself also helps hold it in place. NOTE: I am NOT using the original…
Staedtler's Noris Digital Jumbo Stylus has a fabulous feel, better than the EMR stylus from reMarkable , and a fraction of the price, but lacking that magnetic attachment. This model slips onto the stylus and holds a number of magnets…
Hello! I want to share my Remarkable 2 desk stand with you. The Remarkable fits well without damaging it. I recommend to print this model with a layer hight of 0.1 mm. The print time is still not very long and the top surface will look…
I have designed a stand for the reMarkable 2 in which the replacement tips can also be stored. This saves you searching when the change is needed. The dimensions are designed for a reMarkable with book folio. I printed mine in PetG…
Print settings: 0.3mm infill 15% Brim: yes Material: This part is printed in PLA+, but I think it can be printed in: PLA, PETG, TPU.
protective case for reMarkable marker plus created in fusion 360 photo shows printed in the awesome Bambulab PETG-CF (just started using and it's definitely one of my favourite filaments now!) 0.16mm layer height 15% giroyd infill brim on…
Simple but effective stand and stylus holder for the reMarkable tablet. Designed for my reMarkable 2 but should work with a 1 or 3 as well. I printed mine with PLA, 15% cubic infill at 80-160mm/s on my Ender 5 S1.
Just print this cap. Insert two 5x2mm magnets (e.g. https://amzn.eu/d/1RFlRqu) and now your Lamy will snap on your remarkable 2.
Guide jig for helping connect pogo pins to a reMarkable 2 paper tablet. Dimensions are specifically for reMarkable 2, I haven't checked any of the other models. Hole sizes are for the Pogo-a-go-go pins from Pimoroni (…
You can design custom organize with provided empty slide piece
As there are no cases available for the Remarkable Paper Pro Move, I've created this case to use. Printed with a perfect fit on the Bambu P1S I used 1.2 High Quality with “Precise Z height” and “Precise Wall” enabled.
this remarkable 2 stand is designed at a 22 degree angle, ideal for usability at your desk. Its made in 3 parts so it can be broken down for easy transport
A stand for the reMarkable Paper Pro. The stand is designed to hold the device with the leather folio attached and flipped behind. I have included the fusion f3d file if anyone wants to remix / edit for their setup. This may work with the…
This dock is a remix/redraw of Grummie's original reMarkable 2 dock linked below. It is compatible with the Type Folio. I want to thank and acknowledge them for publishing the STLs. (You can see what I did to their models in the…
Remixed from DrDaniel's design to fit the Marker Plus. I have added 13 millimeter to the length and engraved the reMarkable text into the side. The engraving is meant to be filled with acrylic paint. The cap is resized to fit very…
I took the base design from @Leitzi, and extended upon it to make it more substantial. Stronger support at the base and created a bit of a back plate so that there isn't as much force on the base of the reMarkable. I printed this in PLA…
simple stand for your remarkable 2 print on the side without any supports
This is probably a very very specific thing I've made here, but what the hell, might as well share it. I own a ReMarkable 2 with an Ayotu Case https://www.amazon.com/gp/product/B094NBGG78/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1…
Remarkable Paper Pro protective sleeve case for use with the following : Ayotu case: https://a.co/d/gw38wJW Soft outer case: https://www.amazon.com/dp/B07K21MD18?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
A simple, stable holder for both mobiles and digital notebooks.
This model is design to mount under a wood desk (or some other material you can screw into) and you will nee to print a minimum of 3 but I decided it had a nicer slide with 5. 4 on the sides of the table and 1 in the back. You can have it…
Download the .step file. Recreated from scratch in freecad with the Remarkable 2 in mind. No pen holder, because Remarkable 2 has a magnetic attachment on the side. Note, this will fit a reMarkable 1 as well, but very snugly. And there is…
Suspended underside shelf for two Remarkable tablets, or any other generic tablet with a maximum thickness of 8mm and side length of 21cm. When used with the Remarkable, it's designed to fit 1/2/Pro even when mixed (as shown). Recommended…
Print instructions 3mm brim 0.6 nozzle 0.15-0.2 layer height 2 perimeters no think wall detection PLA (due to its stiffness) You need 8 5x3x1 neodymium magnet (320g +- magnetic force). Stack them in two pairs. Magnets holding in the slots…
this is a protective case for the reMarkable Marker tips. it fits the included acrylic cutout and keeps the tips secure so that you can safely bring them with you anywhere. the fit will be loose until you put the cutout in. f3d files…
Stand for reMarkable2 in landscape only. Printed on an Ultimaker 2+ Connect, see Make for photos. Another iteration for landscape and portrait should come with legs spread apart more or taller stand or both. Note that is intended as a…
My brother complained that we hadn't found a solution to have a pen on his reMarkable marker for when he needed to sign documents or write on real paper. So I've created this pen holder for Christmas. It will clip on the end of your…
A simple ruler to draw straight lines on a Remarkable Pro. It snaps onto the ridges on the side of the paper tablet. Print it in PETG to prevent scratches on the screen. You can park it on the blank space at the bottom of the device.
The marker tends to fall off while taking your tablet out of bag? Fear no more as your pen will be securely held in place by miniature magnetic belt! Magnets used are 3mm diameter 2mm height:…
Just another reMarkable stand. I believe it will fit the first reMarkable, not sure if it would fit the Paper Pro version. It's just a simple stand, nothing fancy. I've printed it in white pla, 100 procent infill to make it a bit hefty.
2 available sizes my remarkable stand: https://www.printables.com/model/1106344-remarkable-2-stand-modular
This is from a Tandem Skydive with NZONE, Queenstown, NZ. Time to print your own souvenir! The topo map part of this comes from the LINZ 8m data, with the Tandem jump pair derived from https://www.thingiverse.com/thing:4169041 . Scale is…
Overview This custom mount is designed specifically for the reMarkable 2 tablet to attach to a honeycomb storage wall system. The design includes a dedicated opening on the left side to accommodate USB-C magnetic charging accessories, you…
This model provides a compact and efficient storage solution for the Remarkable 2 9-tip replacement card using the popular gridfinity system. The design occupies 1x3 gridfinity slots, ensuring it integrates seamlessly with your existing…
I printed the Original and a friend asked for some of the other mission results, especially the less successful ones! Channelling my love for FREEDOM and DEMOCRACY , whilst downing the odd cup of LIBER-TEA , I reproduced the original item…
You can reconfigure the sleepscreen to beautify your home. You can download the necessary software from the website notableutility.com. Everything you need is also explained here. I think the look is very cool if you coat the print area…
Stand for ReMarkable 2 Slot is deep enough for a keyboard folio
Use a 3m strip to tape both parts to the wall. Glue the small clamp behind the usb slot to hold a usb cable in place. It's designed to have a space behind the remarkable because I use a sticking pen pouch at the back - it's more reliable…
When printing you might want to use a higher infill, so it doesn't tend to bend when you write on the tablet. It's built with two parts so that you can fit a cable inside. It might be possible to print them in place, but I haven't tried…
I found this case for the Remarkable Paper Pro Move. It works great for when you want some extra protection when putting it in your bag. Fits in with the standard Remarkable case. Use a brim to help secure it when printing. Does not need…
Vertical desk stand for the reMarkable Paper Pro Move , sized around the tablet with an open or closed stock Book Folio attached. The slot is cut to the folio's real thickness, so the tablet drops in one-handed and leans back at 12°…
❤ If you like this model, drop a like to support my 3D printing addiction (er... I mean hobby)! It looks like three plasters! A modern and elegant stand for the ReMarkable 2 tablet, proportioned to look good in portrait and landscape. Not…
I'm currently working on putting together a functional desk to facilitate my many hobbies. I also have the goal of keeping the space aesthetic in addition to functional. I made this simple holder to both store and display my Remarkable 2…
Shouldn't need supports on the letters. If you paint the surfaces of each letter you can have the logo stand out more. Or just paint it. You still need the charging port cover on the model's page, don't forget that if you want to be able…
For some reason, I'm the only one having a folio on my reMarkable Move that is hard to open. The magnet flappy bit sticks very VERY good to the folio. And because of work I have short nails so it's rather hard to open the folio with the…
Never lose your reMarkable Marker again! While the original magnets of the reMarkable are convenient, the pen slips off way too easily when carrying it around or sliding it into a bag. This minimalistic, functional pen clip slides…
Adds edge protection to the reMarkable Paper Pro with the factory book folio case.
Guide jig for helping connect pogo pins to a reMarkable 2 paper tablet. Dimensions are specifically for reMarkable 2, I haven't checked any of the other models. Hole sizes are for the Pogo-a-go-go pins from Pimoroni (…
These are sleeves that will fit over a Remarkable pen / marker (fit to the Marker Plus), which supports the replaceable stylus tip. The plastic structure on these markers that normally supports the tip is very thin and brittle. Dropping…
I found this case for the Remarkable Paper Pro Move. It works great for when you want some extra protection when putting it in your bag. Fits in with the standard Remarkable case. Use a brim to help secure it when printing. Does not need…
This dock is a remix/redraw of Grummie's original reMarkable 2 dock linked below. It is compatible with the Type Folio. I want to thank and acknowledge them for publishing the STLs. (You can see what I did to their models in the…
