DeWalt Mini Storage Bins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smaller bins for DeWalt's half height storage container
- Ocena
- 4 / 5
- Polubienia
- 90
- Pobrania
- 336
- Wydruki
- 1
- Wyświetlenia
- 1706
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I use a lot of DeWalt storage containers for screws and other construction material. They came out with a half height container, but the bins are too big for what I use, so I made my own. I made these with label lips on the long and short side, but they get in the way of the lid, so I made one without the label lip. That is the one I am using.
I learned the hard way that you need to print these in PETG. If you print them in PLA and leave them in a hot car, they will warp.
I print these at 0.2mm, no supports necessary.
Update 4Nov2024 - Reduced the height of all the models by 1mm to fit better.